Corrosion Resistance of NiCu Foams byDHBT Electrodeposition for Energy - Yasser Reda - Grāmatas - LAP Lambert Academic Publishing - 9786139457519 - 2019. gada 27. februāris
Ja vāks un nosaukums nesakrīt, pareizs ir nosaukums

Corrosion Resistance of NiCu Foams byDHBT Electrodeposition for Energy

Cena
€ 37,99

Pasūtīts no attālās noliktavas

Paredzamā piegāde . gada 7. - 15. dec.
Ziemassvētku dāvanas var atgriezt līdz 31. janvārim
Saņemiet paziņojumus par jauniem Yasser Reda izdevumiem
Pievienot savam iMusic vēlmju sarakstam

Not rated yet

Dynamic Hydrogen Bubble Template(DHBT) technique, aiming at their application as positive electrodes for supercapacitors as well as fuel cells. The corrosion characterization of these NMFs were evaluated in 1 M acidic methanol solution by potentiaodynamic polarization tests, cyclic voltammetry and EIS. At high current density, typical dendritic morphology were developed. The Ni content of deposited layer was ranged from 50 to 57% and the copper content ranged from 8-21%. From potentiodynamic test, the lowest corrosion rate was 0.089 mpy for layer deposited at 0.6 Amp/cm2 for 30 sec. Increasing both the applied current density and the time of deposition lead to increasing of the forward peak intensity and total charge measured by cyclic voltammetry showing a remarkable effect on the electrochemical activity of the films. From EIS test, we observed that the polarization resistance (Rpo) decreased as electrodeposition time increased. The highest polarization resistance was 272 ohm at 0.6 Amp/cm2 for 30 sec, reflecting the highest corrosion resistance.

Mediji Grāmatas     Paperback Book   (Grāmata ar mīksto vāku un līmēto muguru)
Izlaists 2019. gada 27. februāris
ISBN13 9786139457519
Izdevēji LAP Lambert Academic Publishing
Lapas 72
Izmēri 152 × 229 × 4 mm   ·   125 g
Valoda Angļu